mTUBE – lateral shifter

Technical Data:

Dimensions

• Basic dimensions
  • Variant 1,6 > is a shorter mTUBE 1600 x 1600mm for 90°degree direction change of the conveying direction at the front side of the conveyor line.
  • Variant 2,4 > is a wider mTUBE 2400 x 2400mm for 90°degree direction change of the conveying direction on the long side of the conveyor line, e.g. after ejector).
  • Variant 1,6×2,4 is based on the normal standard mTUBE 1600 x 2400 mm
• Height
  • Variant Sledge height = working height = 830mm
  • Frame version: 2135mm (built to slide through standard double doors)
  • Variant boxed: 2628mm (is built for outdoor use. When closed, the flaps serve to protect the system when it is at a standstill. When open, they serve as weather protection for the employee and the goods to be sorted. The rear of the vehicles to be loaded and unloaded can be moved underneath.)

Fördertechnik

• 2x 400 mm roller conveyor
  • possible maximum speed: 2m/s (constant)
  • Weight of the conveyed material per belt section:
    • 50 kg in continuous operation
    • maximum 150 kg
  • Acceleration up to 1 m/s²
  • Drive
    • SEW DC gear roller drive
    • Data interface
• 1x lateral shifter

• Transfer width 800mm
  • Possible maximum transfer speed: 1m/s
  • Maximum weight load 50 kg
  • Acceleration on the transfer unit up to 0.8 m/s²
  • Drives: SEW, data interface

• Clearance width at the belt (between possible side frames): 800mm,
• Forward and reverse running possibility
• lateral shifting right or left
• Throughput up to 1500 pieces/h

other conveying elements can be integrated on the platform.

includes MTT

HMI

Depending on requirements, operating- and display elements can be selected which, among other things, can be installed modularly in the columns and also retrofitted. In addition to the necessary emergency stop buttons, a choice can be made here between:

• Monitor xinch, touch sensitive or display only
• Push-button panel with up to x push-buttons
• Keypad – numeric
• Keyboard – alphanumeric (with arm)
• Hand scanner – wired or bluetooth
• Label printer 3 inch, 4 inch
• additional monitors under the ceiling
• additional camera modules
• Push button
• Luminescent strip

Options

• VTT equipment (cameras suitable for module function with preparation for connection to VTT platform)
• Workplace lighting
• Illuminated strip > Pick by light and signalling of system statuses and operating modes