mTUBE – ejector
Technical Data:
Dimensions
- Basic dimensions 1600 x 2400 mm
- Height
- Variant Sledge height = working height = 830mm
- Frame version: 2135mm (built to slide through standard double doors)
- Variant boxed: 2628mm (is built for outdoor use. When closed, the flaps serve to protect the system when it is at a standstill. When open, they serve as weather protection for the employee and the goods to be sorted. The rear of the vehicles to be loaded and unloaded can be moved underneath.)
Conveyor technology
- 1x 800 mm belt conveyor or roller conveyor
- Possible maximum speed: 2m/s (constant)
- Weight of the material to be conveyed per belt section:
- in continuous operation 50 kg
- maximum 150 kg
- Acceleration up to 1 m/s²
- Drive:
- SEW AC 400V, under the belt, frequency converter remote, cable length between motor and frequency converter max. 10m
- other power classes possible
- or SEW DC.gear roller drive
- Data interface
- SEW AC 400V, under the belt, frequency converter remote, cable length between motor and frequency converter max. 10m
- 1x ejector
- discharge / ejection width 800mm
- Possible maximum ejection speed: 1m/s
- Maximum weight load 50 kg
- Acceleration on the ejector up to 0.8 m/s²
- Drives: SEW, data interface
- 1x 800 mm belt conveyor or roller conveyor (see above)
- Clear width on the belt (between the possible side panels): 800mm
- Forward, reverse
- Discharge right, left
- Throughput of up to 1500 pieces/h
other conveying elements can be integrated on the platform.
includes MTT
HMI
Depending on requirements, operating- and display elements can be selected which, among other things, can be installed modularly in the columns and also retrofitted. In addition to the necessary emergency stop buttons, a choice can be made here between:
- Monitor xinch, touch sensitive or display only
- Push-button panel with up to x push-buttons
- Keypad – numeric
- Keyboard – alphanumeric (with arm)
- Hand scanner – wired or bluetooth
- Label printer 3 inch, 4 inch
- additional monitors under the ceiling
- additional camera modules
- Push button
- Luminescent strip
Options
- VTT equipment (cameras suitable for module function with preparation for connection to VTT platform)
- Workplace lighting
- Illuminated strip > Pick by light and signalling of system statuses and operating modes
Connection:
in conveying direction
- all mTUBEs with conveyor technology
- Chute
- Handover to AGV
- RIP workstation with scanner
neighbouring to the conveyor modules
- Chute
- Boxes
- Roller conveyor for transfer to a parallel line or a circular conveying cycle,
- Roller conveyor for ejection onto boxes (see also ejector onto boxes)
- Soft boxes for small parcels
- AGV transfer
- mTUBE Tour preparation / Sequence sorting extension for employees
Additional accessories
- AGV
- Boxes
- Lifting trolley with lifting function and self loading
For further information or an enquiry, please use our contact form or the enquiry form:
Further variants of rejectors in development cooperation with ….
